Non–Silicone Release Coatings

Mayzo provides a variety of non-silicone release coatings for pressure sensitive and self-adhesive substrates (PE, PP, PET, PVC, Cloth, Foil, and Paper), packaging tapes, heat transfer films/tapes, and protective films. They can be used with hot melt (SIS/SBS) applications, acrylic, and natural rubber.

Solvent-based Release Coatings for Pressure Sensitive Tapes, Labels, and Films

Solvent-based Release Coatings Products List

Benefits:
   High purity provides clean release without ghosting
   100% dry powder
   Based on polyvinyl octadecyl carbamate (PVODC) and polyvinyl stearyl
     carbamate (PVSC) chemistries
   One step dilution process
   Dilutable with aromatic and aliphatic hydrocarbons, chlorinated solvents
     and esters
   Narrow melting point range assures consistent properties
   Release effects remain stable after oven aging
   Very low levels of solids needed, thus cost efficient
   Does not require high temperature processing
   Pre-dissolved solids for reduced time at use point, less waste
    and mixing accuracy
   A special heptane blend is available for use in non-HAP applications
   Liquid versions especially suited for "Siat", or similar, printing presses

(The “Siat” name is registered to the M.J. Maillis Group)

Water-based Release Coatings for Pressure Sensitive Tapes, Films & Labels

Water-based Release Coatings Products List

Mayzo’s water-based release coatings represent a "greener" alternative to traditional solvent-based products. Use of water-based release coatings can help to reduce VOC emissions as well as reduce concerns of worker safety associated with the use HAP solvents such as toluene.

Benefits:
   Based on acrylate, polyvinyl acetate / acrylate, fluoro-acrylate,
     fluoro-phosphate ester, modified polyurethane, polyester / acrylic
     and modified starch chemistries
   Recyclable & Repulpable
   Wide release levels
   FDA Approved for indirect food contact (See product list)
   Printable (See product list)
   Uses include masking tape, paper, and "Sticky Note" type applications

Specialty Products

EPX-2 Primer
   To be used as an adhesion promoter before printing on tape surface that have
     been previously release coated. Also, improves adhesion on untreated or
     corona treated polypropylene films.

RA-B100 Blade Lubricant
   A non-silicone, water-based lubricant for tape slicing and slitter-rewinder
     machines.