BNX MD-1097

Overview

BNX MD-1097 (70331-94-1) is a sterically hindered phenolic antioxidant and metal deactivator.  BNX® MD-1097 protects polymers against oxidative degradation and metal catalyzed degradation during processing and in end-use applications.  This antioxidant also provides long term thermal stabilization properties.

Chemistry

Chemical Name:                     2,2’-oxamidobis[ethyl 3-(3,5-di-t-butyl-4-hydroxyphenyl) propionate]

CAS Number:                         70331-94-1

Chemical Structure:

BNX MD 1097

Typical Properties         

Product Form:                         Solid

Melting Point:                          170 – 180oC

Molecular Weight:                   697 g/mol

Applications

BNX MD-1097 is highly effective to prevent the harmful effects of copper conductors in polymers used as primary wire and cable insulation, including polypropylene, high- and low-density polyethylene, ethylene-vinyl acetate copolymers, and some thermoplastic elastomers. It is also recommended for use other polymer systems where contact with metals may affect polymer properties and stability, including polystyrene, polyesters, and others. Other application areas include hot melt and solvent-based adhesives, mineral-filled plastics, powder coatings and other coatings on metals, and in rubber or plastic gaskets and plastic fabricated parts in contact with catalytic metals.

Advantages

  • Low volatility
  • Strong synergistic effect with phosphites, other hindered phenols, and thioethers
  • Non-staining and non-discoloring
  • FDA cleared for use in adhesives, polystyrene, and olefin polymers

Guidelines for Use

Recommended concentrations for use in plastics and adhesives range from 0.05 to 0.25%. Combinations of BNX MD-1097 with other antioxidants such as hindered phenols, phosphites, and thioethers often show synergistic performance. BNX MD-1097 is also suitable for use in combination with light stabilizers, including hindered amine light stabilizers (HALS), UV absorbers, and benzoates. The exact formulation to be used is dependent on the substrate, performance requirements, and other factors, and should be determined by the user based on testing to simulate actual conditions of use. Please contact Mayzo for specific recommendations.

Storage

This product may by stored up to two years in a sealed container. Containers should be kept tightly closed when not in use and stored in a cool, dry place.

Safety 

Please consult the Safety Data Sheet (SDS) prior to handling or using this product.

FDA Regulations

BNX MD-1097 is cleared for use in adhesives under 21 CFR §175.105 and in polystyrene (including rubber modified polystyrene) and olefin polymers under 21 CFR §178.2010. Please contact your Mayzo representative for complete details, including restrictions of use.

Additional Product Details: Please view our  BNX MD-1097 PDF